Quality inverter 250HP 3phse 380V AC Motor Drive Controller for
pump
EM15 is a new-generation inverter developed independently by
EMHEATER, featuring low noise, hight performance and multiple
functions. It adopts the rotor field-oriented vector control
strategy to realize high-accuracy, wide-range speed and torque
control of the motor
Product features
Support various motor's control mode
Support V/F control, Sensor-less vector control and Closed-loop
vector control.
Support several of encoder.
High starting torque character
150% starting torque at 0.5Hz(Open loop vector control without PG)
180% starting torque at 0Hz(Closed vector control with PG)
| Output Voltage | 0~Rated input voltage |
| Output Frequency | 0~320Hz(SFC); 0~3200Hz (V/F) |
| Control Mode | Sensor-less vector control(SVC); Closed-loop vector control (FVC);
Voltage/Frequency (V/F) control |
| Carrier Frequency | 0.5kHz~16kHz |
| Startup Torque | G type: 0.5Hz/150% (FVC); 0Hz/180%(FVC); P type: 0.5Hz/100% |
| Speed Range | 1:100(SVC);1:1000(FVC) |
| Multiple Encoder Types | It supports differential encoder, open-collector encoder |
| Protection Mode | Motor short-circuit detection at power-on, input/output phase loss
protection, over current and overvoltage protection, less voltage
protection, overheat protection and overload protection,etc |
| Running Command Giving | key panel; Control terminals; Serial communication port; You can
switch between these giving in various ways. |
| Frequency Giving | There are 10 kinds frequency giving: digital setting, analog
voltage setting, analog current setting, pulse setting and serial
communication port setting. |
| Programmable Digital Input | 6 digital input (DI) terminals, one of which supports up to 100 kHz
high-speed pulse input |
| Programmable Analog Input | 3 analog input (AI) terminals, AI1,AI2 support 0V~10 V or 0mA~20mA
input, AI3 support -10V~+10V |
| Programmable Open Collector Output | 1 FMP output terminal, that supports 0–100 kHz square wave signal
output (Can be used as DO output) |
| Programmable Analog Output | 2 analog output (AO) terminals, both of them supports 0mA~20mA
current output and 0V~10V voltage output. |
| Relay Output | 2 relay output terminal (2.2KW and below only have 1 relay output
terminal) |
| Installation Location | Indoor, no direct sunlight, dust, corrosive gas, combustible gas,
oil smoke, vapour, drip or salt. |
| Altitude | Lower than 1000m |
| Ambient Temperature | -10°C~ +40°C (de-rated if the ambient temperature is between 40°C
and 50°C) |
| Humidity | Less than 95%RH, without condensing |
| Vibration | Less than 5.9 m/s2 (0.6 g) |
| Storage Temperature | -20°C ~ +60°C |
Model
Model | Power Capacity (KVA) | Input Current
(A) | Output Current
(A) | Adaptable Motor |
|---|
KW | HP |
|---|
| Three phase 380V 50/60Hz |
| EM15-G3-d75/P3-1d5 | 1.5/3 | 5/5.8 | 2.1/3.8 | 0.75/1.5 | 1/2 |
| EM15-G3-1d5/P3-2d2 | 3/4 | 5.8/10.5 | 3.8/5.1 | 1.5/2.2 | 2/3 |
| EM15-G3-2d2/P3-004 | 4/5.9 | 10.5/14.6 | 5.1/9 | 2.2/3.7 | 3/5 |
| EM15-G3-004/P3-5d5 | 5.9/8.9 | 14.6/20.5 | 9/13 | 3.7/5.5 | 5/7.5 |
| EM15-G3-5d5/P3-7d5 | 8.9/11 | 20.5/26 | 13/17 | 5.5/7.5 | 7.5/10 |
| EM15-G3-7d5/P3-011 | 11/17 | 26/35 | 17/25 | 7.5/11 | 10/15 |
| EM15-G3-011/P3-015 | 17/21 | 35/38.5 | 25/32 | 11/15 | 15/20 |
| EM15-G3-015/P3-018 | 21/24 | 38.5/46.5 | 32/37 | 15/18.5 | 20/25 |
| EM15-G3-018/P3-022 | 24/30 | 46.5/62 | 37/45 | 18.5/22 | 25/30 |
| EM15-G3-022/P3-030 | 30/40 | 62/76 | 45/60 | 22/30 | 30/40 |
| EM15-G3-030/P3-037 | 40/57 | 76/92 | 60/75 | 30/37 | 40/50 |
| EM15-G3-037/P3-045 | 57/69 | 92/113 | 75/91 | 37/45 | 50/60 |
| EM15-G3-045/P3-055 | 69/85 | 113/128 | 91/112 | 45/55 | 60/75 |
| EM15-G3-055/P3-075 | 85/114 | 128/157 | 112/150 | 55/75 | 75/100 |
| EM15-G3-075/P3-090 | 114/134 | 157/180 | 150/176 | 75/90 | 100/125 |
| EM15-G3-090/P3-110 | 134/160 | 180/214 | 176/210 | 90/110 | 125/150 |
| EM15-G3-110/P3-132 | 160/192 | 214/256 | 210/253 | 110/132 | 150/200 |
| EM15-G3-132/P3-160 | 192/231 | 256/307 | 253/304 | 132/160 | 200/250 |
| EM15-G3-160/P3-200 | 231/250 | 307/385 | 304/377 | 160/200 | 250/280 |
| EM15-G3-200/P3-220 | 250/280 | 385/430 | 377/426 | 200/220 | 280/300 |
| EM15-G3-220/P3-250 | 280/355 | 430/468 | 426/465 | 220/250 | 300/370 |
| EM15-G3-250/P3-280 | 355/396 | 468/525 | 465/520 | 250/280 | 370/400 |
| EM15-G3-280/P3-315 | 396/445 | 525/590 | 520/585 | 280/315 | 400/420 |
| EM15-G3-315/P3-355 | 445/500 | 590/665 | 585/650 | 315/355 | 420/500 |
| EM15-G3-355 | 500 | 665 | 650 | 355 | 500 |
| EM15-G3-400 | 560 | 785 | 725 | 400 | 530 |
| EM15-G3-450 | 630 | 883 | 820 | 450 | 600 |
| EM15-G3-500 | 800 | 920 | 860 | 500 | 660 |
Application
Machine tool
Operating frequency can be up to 3000 Hz, suitable for drilling
machine and carving and milling machine.
Big cutting forces, steady speed and high precision.
Can stable operation at high speed.
Terminal RS485 support 500k communication rate.
Various vector control can be applied to all kinds of machine
tools.
Fan &Water Pump/Air compressor
Support built-in Speed tracking card.
Built -in Pressure closed loop and dormancy awakening, protection
function of over pressure.
Built -in extension water supply card, realized one drive for
multiple pumps with clock function.
Realized thermostatic control, high Energy-saving rate.
Small volume and high efficiency, frequency inverter and air
compressor be used cooperatively.
FAQ
Who are we?
We are based in Guangdong, China, start from 2017,sell to Domestic
Market(50.00%),Southeast Asia(12.00%),Eastern Europe(12.00%),South
America(5.00%),Eastern Asia(3.00%),Northern
Europe(3.00%),Oceania(3.00%),Southern Europe(3.00%),North
America(2.00%),Western Europe(2.00%),Mid
East(2.00%),Africa(1.00%),South Asia(1.00%),Central America(1.00%).
There are total about 51-100 people in our office.
How can we guarantee quality?
EMHEATER frequency inverter passed IEC test and has CE certificate.
Each piece of VFD will have 4 testing before delivery, follow ISO
9001 standard. We offer high quality VFD.
Always a pre-production sample before mass production;
Always final Inspection before shipment;
What can you buy from us?
Soft Starter, Frequency Inverter, Servo motor and drive
